A project-specific coating system for factory, warehouse, retail and showroom floors. It aims for a unified appearance, with the specification selected for the conditions of use.
INDUSTRIAL FLOORINGHIGH TRAFFICPROJECT-SPECIFIC SYSTEM
C-Ultima is an industrial flooring approach that combines a refined concrete character with the requirements of high-traffic environments. The system is planned according to substrate condition, use intensity and the desired surface character.
For new-build and renovation projects, substrate preparation, layer structure and the protective finish are considered together. This allows the surface to be specified not only for appearance, but also for maintenance and the intended use scenario.
A flooring approach that brings industrial performance together with the calm architectural character of concrete.
Essential system information for industrial flooring.
Review C-Ultima’s applications, substrate requirements, surface character, maintenance and protection approach at a glance.
—UseHigh-traffic floors
Commercial and industrial areas, depending on project conditions.
—SubstrateConcrete · Screed
Substrate integrity and preparation are checked before application.
—CharacterConcrete look
Texture and tone can be defined according to the project aesthetic.
—ProtectionDepends on protective finish
Selected according to traffic intensity and maintenance conditions.
—PlanningProject-specific
Area, existing floor condition and use scenario are evaluated together.
INDUSTRIAL FLOORING
Industrial Flooring
A complete flooring approach for high-traffic environments
Industrial flooring is not simply about creating a hard surface; it requires the substrate condition, traffic type, maintenance expectations and architectural appearance to be considered together. C-Ultima evaluates these variables before the project is specified.
FactoryProduction and work areasWarehouseLogistics and storage areasCommercialRetail · Showroom · OfficeRenovationSolutions for suitable existing floors
The final layer build-up and protective system are specified according to mechanical loads, pedestrian traffic, cleaning methods and the conditions the surface will be exposed to.
Every space has a different load, traffic and maintenance scenario. C-Ultima system details are evaluated according to these conditions.
01
Factory & production
System selection based on substrate, traffic and maintenance conditions in production areas.
02
Warehouse & logistics
Layer planning according to the use scenario in storage and circulation areas.
03
Retail & showroom
A surface approach that combines a concrete look with the aesthetics of commercial interiors.
04
Office & social spaces
A flooring solution that supports architectural continuity in areas with intensive pedestrian traffic.
APPLICATION
C-Ultima application system
The layer build-up may vary by project; the existing floor and use conditions are assessed before application.
01
Substrate analysis
The integrity, flatness, moisture level and existing coating condition of the concrete or screed are checked.
02
Preparation & primer
Required mechanical preparation, repairs and the appropriate primer system are completed according to project conditions.
03
System layers
Flooring layers are applied according to the intended surface character and use scenario.
04
Protective finish
The surface is completed with a protective system suited to cleaning, traffic and exposure conditions.
SYSTEM
C-Ultima system components
C-Ultima is not a single material; it is a system approach in which substrate preparation, primer, required intermediate layers, the decorative flooring layer and protective finish work together.
The same specification is not used for factories, warehouses and showrooms. Traffic type, surface exposure, maintenance method and the condition of the existing floor determine the layer selection.
C-Ultima brings technical requirements and concrete-look surface aesthetics together within one project approach.
01
Continuous appearance
A calm, continuous architectural surface is targeted across large floor areas.
02
Project-specific system
Layer and finish selection are planned according to traffic intensity and the existing floor.
03
Renovation approach
On suitable existing surfaces, solutions that may reduce unnecessary removal can be considered.
04
Maintenance planning
Cleaning and periodic maintenance requirements are considered together with the use scenario.
APPLICATIONS
C-Ultima surface character
Different spatial expressions of the concrete look across industrial and commercial floors.
Industrial flooring · Large surfaceFactory · Concrete characterCommercial space · High traffic
FREQUENTLY ASKED QUESTIONS
Quick answers about C-Ultima.
Four common questions when evaluating an industrial flooring project.
What is C-Ultima?
C-Ultima is a decorative industrial flooring system developed for commercial and industrial spaces with intensive use. The substrate, traffic level and protective finish are evaluated together for each project.
Where can industrial flooring be used?
It can be considered for factories, warehouses, logistics areas, retail spaces, showrooms, offices and similar commercial environments when the substrate and use conditions are suitable.
Can C-Ultima be applied over an existing floor?
Suitable existing concrete, screed and other stable substrates may form a base for the system after the required mechanical and surface preparation. Suitability should be checked before application.
Why is the protective finish important on industrial floors?
Traffic intensity, cleaning methods, water exposure and potential chemical contact influence the choice of protective finish. The final system should be specified according to project conditions.
C-ULTIMA · PROJECT REVIEW
Let us review your industrial flooring project.
Share the existing floor, intended use, traffic type and approximate area. We will help define the appropriate C-Ultima system approach for your project.
